Home Theater Forum and Systems banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
89 Posts
Discussion Starter #1 (Edited)
I bought these a few months ago and never go around to doing the project. They are BRAND NEW in the original boxes. Never used, so everything is in perfect order. These are 4 ohm DVC. The MSRP on these were over $200 each, I am asking $149 for both. I live in Orange County California and would be willing to ship if buyer pays shipping. My ebay ID is bphawkins, 100% positive selling feedback. Paypal accepted.

4Ω DVC
400w RMS
High thermal four layer aluminum 2" voice coil
High excursion 8.5" linear roll poly-cotton spider
1" wide long throw, highly durable NBR surround
Recomended enclosure sizes: Sealed .7 - 1.5ft3, Vented 1 - 2.5ft3
XMAX - 20mm



T/S Parameters
Qts 0.453 Rp 5.93Ω
Qes 0.534 Dia 241mm
Qms 3.347 Vas 71.0l
Fs 24.7Hz mms 169g
Res 7.55Ω cms 246um/M
Ls 6.26 bl 19.2Tm
Lp 6.55 Spl 86dB


Driver Cutout Diameter Basket Diameter Mounting Depth Displacement Weight
Mistral 12 11.25" 12.65" 7.5" 0.08ft3 18.0lb
 

·
Registered
Joined
·
89 Posts
Discussion Starter #5
Here are a few pictures of Torrent Mistral subs.

http://photos.ganzhorn.org/album630/69CG1034

I still have the original boxes (double boxed).

The T/S parameters were taken from the manufacture. Here is an updated look of the driver, with the exact same parameters:

http://www.torrentaudio.com/xo12-p-101.html

Some pics from another forum member after his build:

http://photos.ganzhorn.org/album645

http://photos.ganzhorn.org/album649

Hope that helps, if you live in So Calif and want to come over and take a look, you are more than welcome. They are BNIB, never been used. I never got around to this project.
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top