Joined
·
538 Posts
Re: Blue prints of first sealed sub... need input!
I would suggets that all your braces look like the one you have in the bottom rather than those little stick cross members. Also, I would put another horizontal brace just above the woofer and a pair of vertical ribs (about 3 iches high) on either side of the Amp cutout.
Box size looks about right for that driver, although you could reach excursion limits at about 180W. You could reduce the size of the box some if you stuff it.
Overall, it looks good...I'm sure it is going to rock!
I would suggets that all your braces look like the one you have in the bottom rather than those little stick cross members. Also, I would put another horizontal brace just above the woofer and a pair of vertical ribs (about 3 iches high) on either side of the Amp cutout.
Box size looks about right for that driver, although you could reach excursion limits at about 180W. You could reduce the size of the box some if you stuff it.
Overall, it looks good...I'm sure it is going to rock!
