Joined
·
13 Posts
Have applied eq to sub only and have now added my mains can someone give me any advice on how
graph looks and any tips on how to improve it. Thanks
graph looks and any tips on how to improve it. Thanks
Advice on measurement
1 - 3 of 3 Posts
Not bad at all.
Around 80Hz and 100Hz there are dips and peaks. I wonder if you have adjusted the phase control of your subwoofer (or distance of sub in receiver) to try and smooth that out a bit?
In the future try and post your graphs with the standard used here of vertical = 45dB-105dB and horizontal of 15hz-200Hz.
brucek
Around 80Hz and 100Hz there are dips and peaks. I wonder if you have adjusted the phase control of your subwoofer (or distance of sub in receiver) to try and smooth that out a bit?
In the future try and post your graphs with the standard used here of vertical = 45dB-105dB and horizontal of 15hz-200Hz.
brucek
Joined
·
9,359 Posts
In addition to the graph scaling, it would be helpful to see a sub only graph as well as subs and mains.
Regards,
Wayne
1 - 3 of 3 Posts
