Home Theater Forum and Systems banner

1 - 4 of 4 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter #1
I have a couple of these drivers and was going to put them in to sealed enclosures, I used Unibox and with a 1000w input in a 1.98cu ft (56Lt) box it gave a QTC of 0.547 and reached xmax at 10Hz.

The room I am going to be using will be approx 2000 cu ft. I started wondering if it would be better to go for a ported design, if so, has anyone any ideas on what size enclosure, and what size/length port would suit these drivers?

Thanks
 

·
Registered
Joined
·
17 Posts
Discussion Starter #3
Here are the ts details;

AV15-H
Fs: 22Hz
Qms: 4.86
Vas: 197L
Cms: .22mm/N
Mms: 235g
Rms: 6.7kg/s
Xmax: 23mm
Xmech: 32mm
Sd: 794dqcm
Vd p-p 3.67L
Qes: .29
Re: 2.7ohm
Le: 2.8mH
z: 4ohm
Bl: 17.6Tm
Pe: 1000W
Qts: .27
1wSPL: 90.7dB
2.83V: 95.5dB

Thanks
 

·
Registered
Joined
·
129 Posts
SBX:
Check out the ported build sections here.
You can also go to the forum at aespeakers.com for feedback.
 
1 - 4 of 4 Posts
Top