Home Theater Forum and Systems banner
1 - 4 of 11 Posts

· Registered
Joined
·
51 Posts
Discussion Starter · #4 ·
Dude thats all:unbelievable: I have had my 920 up to 5 ghz (liquid cooled with the heatkiller block) but had to back it down to 4.4 for everyday use. I have a 9550 up to 4.5 ghz(liquid cooled with the ek supreme block) for everyday and the 5300 up to 4.8 b/c ( on air with the coolermaster V8)of the high multi. So know who u r talking to before you speak. Anyway i was looking at the 500 bash or the behringer a500.
 

· Registered
Joined
·
51 Posts
Discussion Starter · #8 ·
The parameters for the SRX15 are:
Electrical Q Value -Qes: 0.45
Mechanical Q Value -Qms: 4.87
Total Speaker Q Value -Qts: 0.41
Free Air Resonance -Fs: 23 Hz
Equivalent Compliance -Vas: 203 liters
One-Way, Linear Excursion -Xmax: 18 mm
Efficiency -SPL 1W/1m: 87.6 dB SPL
Effective Piston Area -Sd: 810 cm^2
DC Resistance -Re: 1.8 ohm
Nominal Impedance -Znom: Dual 2/4 ohm
Thermal Power Handling -Pe: 300 W
Force Factor -Bl: 14.35


Tuning frequency per winisd is 21hz. Box size is 8.8ft^3 ported and 4.235ft^3 sealed.
 
1 - 4 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top