Home Theater Forum and Systems banner

1 - 7 of 7 Posts

·
Registered
Joined
·
922 Posts
Discussion Starter #1 (Edited)
I am looking to build a Home theater Sub, I just want to copy an existing plan. I live in 3/2 house so size is an issue. It will be 80 % home theater use. 20 % music.

I am looking to use a 10inch Sub with a 250 amp plate. Can someone point me to a good design to use. My budget is about 400$.

I am trying to find a design maybe for that peerless XLS 10. Thoughts ?

Thanks
Chris
 

·
Registered
Joined
·
1,026 Posts
I am looking to build a Home theater Sub, I just want to copy an existing plan. I live in 3/2 house so size is an issue. It will be 80 % home theater use. 20 % music.

I am looking to use a 10inch Sub with a 250 amp plate. Can someone point me to a good design to use. My budget is about 400$.

I am trying to find a design maybe for that peerless XLS 10. Thoughts ?

Thanks
Chris
Chris,

I hate to honk my own horn, but if I were you, I'd look at my Shiva-X2 with a 300W BASH amp. In a 100L box (3.5 cubic feet) it would absolutely destroy that Peerless with a single 4" flared port tuning it to 20-21Hz.



You would have:

$150 for amp

http://www.parts-express.com/pe/pshowdetl.cfm?&DID=7&Partnumber=300-750&ctab=2#Tabs

$14 for port

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=268-352

$200 + shipping for Shiva-X2.

http://www.diycable.com/main/product_info.php?cPath=24&products_id=693

Add a sheet of MDF and you are done. It will crush that Peerless like it was a little girly sub.

Kevin Haskins
Exodus Audio
 
1 - 7 of 7 Posts
Top