Home Theater Forum and Systems banner

1 - 10 of 10 Posts

·
Registered
Joined
·
103 Posts
Discussion Starter · #1 · (Edited)
what im really looking for as comparion is data measurements like port vrms output for the xlrs an sinad ratios an values like the kind ya'd get on audiosciencereview.com



i know the outlaws as the 976s is got some details on ther main that the at300 does not like this




Analog Section
Input Impedance

47Kohms
Output Impedance
(Main-RCA)1KOhms
Pre Out
RCA 4Vpk; XLR 9Vpk
Frequency Response
Line 10Hz to 80kHz ± 1dB
S/N Ratio (IHF-A)
112dB
Volume Range (Main)
-90dB to +0.0dB
Bass Management
Crossover Frequencies

Adjustable 40-150Hz in 10hz steps, + 200Hz
High-Pass Slope
(Small Speaker Setting) 12 dB/octave (2nd order)
Low-Pass Slope
(Subwoofer) 24 dB/octave (4th order),
Tone Control
Bass Center Frequency/Range

100Hz ± 10dB
Treble Center Frequency/Range
10KHz ± 10db
Tuner
FM Tuner Section
Sensitivity

IHF 10dBu typ.
50dB S/N 13dBu typ.
S/N Ratio
Mono

70dB
Stereo
67dB
Distortion
Mono

0.2%
Stereo
0.3%
Stereo Separation
40dB typ.
Adjacent Channel Selectivity
70dB +/- 400kHz
IF Rejection Ratio
120dB
Frequency Response
20 Hz to 15 kHz ± 1.5dB
AM Tuner Section
Sensitivity

(20dB S/N) 300uV
S/N
45dB
Selectivity
25dB
Distortion
0.7%
Digital Audio
Digital Audio Inputs

75 ohms , 0.5Vp-p
Processor
TI-DA808
General
Supply Voltage

120V +/-10%, 60Hz only
Standby Power Off :
0 .5W
Trigger Output
Sequential Delay 50 mA @ 5VDC
Dimensions
(HxWxD)

4 5/8”x17”x11”
Weight
12 lbs.

an
 

·
Registered
Joined
·
103 Posts
Discussion Starter · #10 ·
if anyones got those data details on the at300 sinad output db an other values an any screen shots of the manuel id like to read over to compare to the outlaws these pages were helpful to me in my chose to by it an with similar detail of the at300 would do the same for it
 
1 - 10 of 10 Posts
Top