Home Theater Forum and Systems banner

Attenuating gain

1K views 7 replies 2 participants last post by  NBPk402 
#1 ·
I have the balanced 2x4 MiniDSPs, and now have amps without gain adjustments... Is there a way to attenuate the level for my horns with the MiniDSP? I need to attenuate about 12db.

tia,
Ron
 
#3 ·
I assume you need gain adjustments post-crossover filtering on the outputs. I don’t see any provision for this in the manual. If this is the case, it’s a major faux pas on the part of miniDSP. All analog crossover have gain controls on the outputs.

Regards,
Wayne
Hi Wayne,
The only gain I saw in the MiniDSP was per channel in the last window. Do you think the XLR attentuators would work...or do you think that will add noise?

tia,
Ron
 
#5 ·
#6 ·
I re looked at the MiniDSP, and it might be able to do it, if I am reading this correctly. I see the output is selectable.
 

Attachments

#8 ·
:T:T
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top