Home Theater Forum and Systems banner

Av-65wp74 Convergence wiring

3K views 3 replies 1 participant last post by  lcaillo 
G
#1 ·
hi my friend just gave me his Av-65wp74. he re-placed the convergence chips but he has all of the wires unpluged from the board except one. the others he removed from the tv. can anyone tell me the correct locations for the wires. i have the red,blue and green correct but need help with the others


thanks

cade
 
G
#3 ·
thanks i got the board most of the hooked up. the only one i can’t find out where it goes is the one that is hooked in with the wire that is connected to the board where it is labeled conver pb 'y it has 3 tan wires and 4 grey. Any hints on were this would go

Thanks
Cade
 
#4 ·
I don't recall the numbers, but there was one wire that goes to one of the standing modules that was hard to see the connector for.

The service manual may have a wiring diagram if you can find it.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top