[dvenardos]

I am trying to calibrate the soundcard per the instructions and am totally lost. Am I supposed to be adjusting the left and right graphs to match the Out graph? Adjusting the input and output volume seems to have no effect. I am using Vista Home Basic and have the Right output connected to the Right input. Please help a mental retard...:scratch:

 

[dvenardos]

First problem is the output is muted (the "mute" box is checked by output volume) so need to correct that. Is the input a Line input even though it is called "Microphone"? You need a line input.

I did notice that I tried it with and without the mute box checked but neither worked. It is a line input, I am using the Behringer UCA202 which has l/r in and l/r out. Is it the left and right graphs that I am supposed to be matching to the out graph?

 

[dvenardos]

Hopefully you have used the appropriate adapters to break-out the left and right channel to get access to the right channel for loopback.

Hum, maybe the card is bad? This the UCA202, no adapters are necessary it has rca ins and outs:
http://www.behringer.com/EN/Products/UCA202.aspx

 

[dvenardos]

So, have you looked at the Windows Recording Mixer to be sure that the line-in is enabled and the Volume isn't muted.

Ah, thanks. The corresponding tool in Vista is different, but I was able to find the settings and change the input volume from 20% to 100% and that solved the problem. I don't do audio on the PC so didn't know to look for that.

Thanks,
Don