Home Theater Forum and Systems banner

1 - 6 of 6 Posts

·
Banned
Joined
·
1,131 Posts
Discussion Starter #1
Xenyx 802

Testing chain: External loopback (line-out - line-in)
Sampling mode: 24-bit, 96 kHz

Looped with EMU 0404 USB 1/4 TRS Input - RCA Output




Frequency response






Noise Level






Dynamic range






THD + Noise (at -3 dB FS)






Intermodulation distortion






Stereo crosstalk






IMD (swept tones)




 

·
Banned
Joined
·
1,131 Posts
Discussion Starter #2
Xenyx 802 - Special Test

Testing chain: External loopback (line-out - line-in)
Sampling mode: 24-bit, 96 kHz

Looped with EMU 0404 USB 1/4 TRS Input - RCA Output

Frequency response - Infrasonic Extension



Based on this the F3 is between 6-7Hz with the unit down about 1-2dB at 10Hz.

Frequency response - High Frequency Extension

 

·
Registered
Joined
·
2,431 Posts
Andy,
Can you expand your measurements beyond 20 and 20khz mainly for us crazies out there :dumbcrazy: who try to get response below 10hz? Most modern day electronics are going to be fine between 20-20khz. I'm very interested in what happens at the extremes and I know others are too. My Xenyx 1202 measured very well atleast as far as the FR was concerned. Thanks.
 

·
Banned
Joined
·
1,131 Posts
Discussion Starter #4
Andy,
Can you expand your measurements beyond 20 and 20khz mainly for us crazies out there :dumbcrazy: who try to get response below 10hz? Most modern day electronics are going to be fine between 20-20khz. I'm very interested in what happens at the extremes and I know others are too. My Xenyx 1202 measured very well atleast as far as the FR was concerned. Thanks.
Added to post two. Enjoy!
 
1 - 6 of 6 Posts
Top