Home Theater Forum and Systems banner

BFD vs Reckhorn B-1

1874 Views 7 Replies 6 Participants Last post by  Owen Bartley
:wits-end:I am looking for the simplest way to get a SSF as well as some boost in required areas. I took a look at the BFD "tutorial" and began to think that it was far too complicated. All I want to do is hook up my receiver to my EP 2500 to my IXL 15.2.2 without worry of it bottoming out on the very low stuff.

Honestly, I don't understand alot of what I read about these upscale EQ's! I want as much of a plug and play EQ system as I can get with a minimum of $$$$$'s. The Reckhorn seems to be the ticket...unless I am misunderstanding the BFD.?

The BFD is a better cost but with a calibration mic and all of the other stuff mentioned in the tutorial, it is quite expensive. I just want to keep it simple.

What do I need?
1 - 1 of 8 Posts
The Reckhorn also has a high cut which the EQ.2 doesn't have. But no phase that the EQ.2 does have.
But the EQ.2 adds one more EQ adjustment, which isn't needed if you have a BFD.
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top