Hello fellow better sound seekers!!
Im seeking wisdom on biulding diy box for an Alpine type-r 12" SWR-1222D...
I have some measurements..but not totally foresure how to compensate if needed to actually build a t-line box!
The #'s i have are from the owners manual which only says for vented...
Using 3/4 mdf and doubling the mounting wall with T-nuts,45's in corners!
So,the main Q's is it worth biulding t-line or slotted L-port at 22.75"x16ishx1.25"..
Im seeking wisdom on biulding diy box for an Alpine type-r 12" SWR-1222D...
I have some measurements..but not totally foresure how to compensate if needed to actually build a t-line box!
The #'s i have are from the owners manual which only says for vented...
Using 3/4 mdf and doubling the mounting wall with T-nuts,45's in corners!
So,the main Q's is it worth biulding t-line or slotted L-port at 22.75"x16ishx1.25"..