Home Theater Forum and Systems banner
1 - 1 of 31 Posts

· Registered
66 Posts
This sound similar to something I've run into:

Conditions under which the problem occurs:

1) Set up REW using external soundcard (Creative X-Fi 5.1). Do measurements .... all works fine.
2) Shut down laptop and reboot without the sound card attached.
3) Shut down system and re-connect Creative soundcard for another REW session.

At this point REW seems to lose knowledge of the external soundcard. My work around is to re-select the soundcard in settings under 44 KHZ. (both input and output), then select "speaker" and "line in" under 48 khz.

Then it works. I've run into this every time I've done 1 - 3 above. It's like something gets reset after starting up without the sound card attached.

Don't know if this helps or not, but wanted to let you know.

1 - 1 of 31 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.