[dfeller]

Howdy:

EDIT - See about 5 posts down for the actual eBook posted here!!

While there are some great hardware guides out there for selecting the right components for a DIY DVR, the information on how to put it all together is either scarce or scattered. To that end, I've put together the first installment of an ongoing series on PC-DVR construction and options.

The "Pre-Wire your Home" eBook (see my signature) was such a success that we jumped into this next topic.

It's all free - a little selfish on my part as it allows me to point to a whitepaper to offload answering the same questions multiple times a day...

The Build Your Own DVR eBook can be downloaded from www.bocsco.com/DVR
(It is a signup - you get the first section and then are automatically sent new chapters as they are published every week or so)
The first couple chapters focus on the differences between various system types, tuner types (analog, digital, QAM, ATSC) what you can and cannot reocrd with each type, and how to choose both the tuner type and general components you need just to get started.

I also did an introductory video (Part one - Use Your Old PC)

,

and Part two - Build a new PC-DVR

to accompany the whitepaper - and there is a daily BLOG that covers the project progress and all the issues we run into.

Come on, this is something you have always wanted to do - this should make it easy!

As always, I openly welcome inputs, corrections, and even contributors if you have the time.

David Feller

 

[robbo266317]

Well done David.
There have been people regularly asking for this sort of thing. :T

 

[dfeller]

I just published the next couple of chapters:

• Prepping your PC to become a DVR
• DVR software - an overview of what's available
• Must have links, guides, and software

Again, the purpose here is not to push a particular DVR software package or another - I ended up going through both the "Free" programs as well as the ones that you have to buy and compared the features and functions of each. There are many more out there, but what you will find in the text are the ones I've installed either for myself or a customer.

I'll post the fist few chapters in this thread as I get time to reformat it all from Word... In the meantime, feel free to grab your copy from www.bocsco.com/dvr

As always - comments, corrections, or even ridicule are all welcome.

David

 

[dfeller]

Due to popular request, I'm going to post the book here as I'm able - as always you can get the whole thing at www.bocsco.com/dvr

Chapter 1: Why would I do this?

Good question! Some folks are motivated by the challenge – you really can build something better and more versatile than the DVR you get from your cable company or from TiVo and like any other home project, you can brag about it to your friends. It has traditionally been the exclusive domain of the high-end tinkerer but with relatively new tuner cards, software, and this guide – anyone can do it.

So let’s compare your options:

Notes:
1 – Only rent movies from cable company – very limited selections
2 – Take mobile through TiVo desktop – very slow transfer, limited playback rights
3 – TiVo DVRs can share a recording list but you are required to have a series 2 or better TV at every TV in your home (up front cost) AND pay monthly for every TiVo just for that feature.
4 – Movies and Music can be accessed by a TiVo through TiVo desktop but codecs are limited and access is difficult
5 – Renting and buying movies works well through TiVo although you have to buy from one of their partners. No ability to access media from P2P

I don’t know about you, but I see a pattern here!!


WHOLE-HOME:
I’d like to specifically draw attention to the whole-home part, as once people understand that piece, it is usually the motivating factor for taking on this kind of project.

If you build your own DVR, not only can you record ANYTHING, you also now own all those files. That may sound simple, but it is huge as our media collections begin to grow. With other systems, the recordings are encrypted, and while you have temporary access, you can’t just grab a program off your TiVo or off your cable company DVR and do with it whatever you like – there are keys, encryptions, special ways to access it and other big brother stuff.

Build your own and you get more freedom:

Want to watch a program in your bedroom instead of the main TV? You bet
Want to take a program to a friends house and watch it? You bet
Want to start watching a program in the living room, get tired and finish in bed? Yep
Want to record that movie off HBO and keep it in your collection forever? Oh Yeah
Want to cut down your Cable AND TiVo bills? Easy

 

[dfeller]

Chapter 2: The Basics of PC-DVR

Surely this isn’t really that hard, any old PC, add a tuner card, hook it up to your TV and you completely replace the need for TiVo right? With a little planning and the right pieces, absolutely; anyone can do it. Before we go through the specific things you need, you should consider exactly what you want to record.

Broadcast Overview
Analog, Digital (premium channels), SD, or HD:

CableTV – Generally systems include analog (NTSC – same as used to be broadcast over the air) from 2-60 (ish) including local channels, must carrys like city public service channels, and what the cable company deems “basic cable” – scifi, discovery etc. Premium channels, encrypted and transmitted on the cable using Quadrature Amplitude Modulation (QAM) require a set top box of some kind to receive. Those digital channels are stacked, sometimes 10 deep, in each of the “old” analog slots. The system allows cable operators to put a lot more channels in the same bandwidth so they can better compete with satellite. Cable companies are also required to carry local HD stations and they normally do that using un-encrypted “clear QAM” so any TV with a QAM tuner can receive them.

Some cable companies have begun to go “all digital” – in which case there are no NTSC analog channels at all and everything requires either a clear QAM receiver or a mini Set Top Box. The simplest way to see is to plug the cable right into your TV, tell your TV to tune cable stations (as opposed to air), and see if there are channels on 7, 8, 9, 10.

One other thing to keep in mind is that set top boxes do not give you real information on what you are watching. If you are watching channel 9 through a set top box, it is most likely not tuning to NTSC channel 9 even if you do have analog basic cable in your system. Nearly all channels have a digital “version” broadcast at a much higher frequency and the set top box basically says – you didn’t really want to watch that old analog channel, did you? I’ll just give you the better digital version instead.

Premium channels – basically anything the cable company wants you to pay extra for (sci-fi, military channel, hbo). These are all transmitted using the same QAM modulation but they are encrypted. Much like a wireless lan WPA key, the cable box they give you and their head end share a digital key and they can tell the cable box to decode some channels but not others.

HD channels on the cable system are transmitted using the same QAM, just using more bandwidth than just a “digital channel”. The only issue is that where these channels are located is up to the cable company. That means they do tend to change from time to time and are sometimes not well documented. That can cause trouble with electronic program guides being able to interpret your desire to record CSI into a tuner command to go to a particular channel number.

Cable Cards – Some TVs, TiVos, and even a few stand alone tuners are capable of having a cable card inserted. Recall we said that the normal “free” channels broadcast using clear QAM and the premium channels actually use the same modulation and encoding schemes but you have to have a decoder capable of sharing a digital key to receive those premium channels. A Cable Card is basically the “innerds” of a set top box and contains the engine that holds a digital key and can be addressed by the cable company. By inserting one of these cards into your device, the cable company now recognizes your device as a cable box and therefore gives you all the channels you pay for without having to have a separate cable box. This is great for TVs that hang on walls with no room near for an equipment stack. Cable cards are mandated by the government and must be provided by your cable company – usually for a small monthly fee. They are PCMCIA cards (very similar to the networking cards that you slip into your laptop) and if your device is capable it will have one of those slots. One potential drawback is that they typically do not provide electronic program guides or any kind of DVR functionality, just the ability of a TV to receive encrypted channels. Personally, I stay away from them at all costs. They tend to be hard to configure, the cable techs are usually poorly trained on them, and you lose the benefits of a cable box when you insert one.

Over the Air: what’s with all the .x channels?
If you watch the news, or pretty much any TV at all, you were subjected to a barrage of warnings over the last 2 years about the conversion to digital. The government stepped in and spent literally billions of dollars to force the entire industry to convert to a new broadcast scheme. Long story short, your ability to hook an antenna up to your old TV and receive NBC on channel 4 is gone. Good news is the new system is better. Even using a converter box that knows how to tune and decode the new ATSC digital signals and transpose them so grandma’s old TV can watch them the signal is unquestionably better – even the SD stations. For that matter, coverage is also better, more people can receive the better signals and there are many more channels being broadcast. It turns out that each broadcaster can put 5-10 channels out from one transmitter instead of just one with the old system. Channel mapping wise, it is very similar to cable except the numbering is different. Huh?

With a cable TV system (see above diagram), the cable company stacks multiple unique programs into a single traditional “channel”. For instance, they may put ESPN-HD, the military channel, and 4 others digitally in the same space of the “old” channel 65. Since the cable companies control the cable boxes, you as a consumer never really know where the channels are broadcast – nor do you care, so they end up assigning a nice unique channel number to each one that shows up on your cable box. ESPN-HD might be 645, military channel 274, etc. but as it turns out the cable box has a nice cheat sheet and knows that when you punch in 274 it needs to get the second channel at the old “65”… With over the air, there is no controlling cable box or big brother providing a cheat sheet, so the system is much more basic. The first program on old channel 9 is 9.1, the second program is 9.2 etc. Obviously, you also need some tuner that understands the new ATSC format as well.

 

[dfeller]

Why does all this matter? Because you have to choose the tuner, PC input, video card, and a few other things based on what you want to record. Obviously, the easiest answer is to record everything, but cost, effort, and what you have available to start with might define your project. In my home, I use a basic TiVo (analog channels only) for a huge majority of typical nightly shows, a TiVo connected to a set top box for premium channel recording, and a PC-DVR for high def recording. That means that an analog DVR might actually cover most of your needs, and if we can put one together for very low cost and no monthly fees that might be a good place to start.

PC Tuner Basics:
So, what tuners are available? A sample list is provided below of ones I’ve used or have seen used, but there are some very specific categories:

Tuner Types:
A tuner card may have a combination of these tuner types.

Analog Tuner: Means it can tune in and receive NTSC signals. Prior to this year that was the standard for standard definition over the air (good old antenna), but it is still in use in most cable TV systems for basic cable (the first 60 or so “local” and basic cable channels)

QAM tuner: Used alone this means it is capable of receiving “clear QAM” – those channels broadcast on a cable TV system including SD and HD channels but not premium channels (those are also QAM but are encrypted)

ATSC tuner: The new over the air standard. In any given city you should be able to pick up between 5 and 20 or so channels many of which are HD. As a side note, these will almost always be higher resolution and better quality than what you get over cable or satellite.

Cable Card Tuner: Only a very few of these are on the market, but the idea is that in addition to clearQAM signals, these tuners have a slot for a decoder card (PCMCIA card) provided by your cable company that allow you to also watch premium channels (whatever you subscribe to)

FM tuner: FM radio

Composite in: Generally used by these same tuner cards as a means by which you can hook them up to a stand alone cable (or satellite) set top box. Since these cards generally only receive NTSC, ATSC, or clear QAM they cannot, by themselves, record premium channels like HBO. Using an external set top box and feeding it to the tuner card via composite video (Standard definition), allows you to record those premium channels. In general, only composite is provided (or s-video which is roughly the same) as an input on these cards meaning you cannot record high definition through these standard cards.

Component in: Same concept (ability to hook up an external set top box) as with composite except this allows high definition recording. I suggest caution on this however, as the few internal cards that have component in do not have their own MPEG or h.264 encoder and therefore use the host processor for compressing video and therefore only work with the provided applications. i.e. windows media center does not recognize them as tuners. The exception to this is the Hauppauge 1212 external HD capture device. When used in conjunction with third party drivers, windows media center will recognize it as a tuner. Actually, it recognizes it and the set top box it controls together as a tuner.

Hardware vs. Software encoding: Hardware encoding means that there is a specific and dedicated piece of silicon on the tuner card that can take analog video (NTSC tuned or composite in) and encode it to MPEG2 or H.264 without having to use host CPU resources (For example Hauppauge 150/250/350 cards). This is critical if you have an older PC you are trying to transform or intend to have multiple tuners in one PC or want to watch “live-tv” (essentially two separate operations, one encode and one decode so you can pause and rewind live TV – it basically stores in real time what you are watching and plays it back right from the disk). Obviously, the host CPU can both encode and decode video. The question is how many simultaneous streams can it handle and also handle the core operating system and general I/O. A good rule of thumb (although you should consult online forums to see others experiences with your intended setup) is that it takes roughly 1GHz per encode stream for software encoding (using the host CPU) and just for safety half that for hardware encoding (likely less but that is a good safe rule for hardware encoding). For example, a PIII-1Ghz system can typically encode and decode a stream simultaneously allowing live-tv watching. A P4-2.5GHz machine can simultaneously encode two 480X480 MPEG4 files and simultaneously serve a filestream to a media center extender. Given the relatively low cost of cards with hardware encoders, I would highly recommend sticking with one of those.

Decoding video: Since we are on the topic of encoding, you should also consider hardware and software decoding – meaning playing back video. For SD content, the requirement is roughly the same as with encode. For HD content, it typically takes a fairly powerful CPU. 720p typically begins to be trouble free with a P4 CPU at about 2.5GHz and full 1080i or p can be done with a 3GHz processor (or much less if you have an nvidia video card with decode acceleration.

Video cards: Look for a video card that supports XVideo (or XV) extensions. That will offload some things like color conversion to your GPU and be easier on the host.

 

[dfeller]

Multiple vs. Dual Tuners: Most tuner cards that support QAM or NTSC will also support analog (NTSC and composite in) and marketers sometimes calls there dual tuners. Technically speaking this is correct as the analog tuner is normally separate from the digital tuner – and almost always have separate F-connector inputs. You should, however, read very carefully as to whether the two tuners (analog and digital) can be used at the same time and whether the DVR software you are using can recognize them independently. There are also a few truly “multiple tuner cards” meaning they have more than one analog and/or more than one digital tuner. The Hauppauge 2500 series is such an example. There are, however, still some limitations. You are generally limited to watching/recording two digital or one analog and one digital program for instance. The restriction is generally a result of how many separate encoder chips are on board.

A specific example – the Hauppauge PVR-350

So, lets take a minute and examine one particular board – the one I happen to have on hand and will be using for this guide – the Huappauge PVR-350 PCI. It is interesting and a little different for two reasons: It has a Conexant chip onboard that can simultaneously encode and decode MPEG2 video (meaning it actually has it’s own video output – very handy), and it is one of the most universal boards supported on almost all PVR software platforms.

Digital boards also have a digital decoder – something that will tune in either QAM or ATSC or both – like this.

The digital demodulator takes an analog waveform from a DTV transmission, and “demodulates” it to its baseband digital form. The output of the demodulator is typically MPEG2 packets.

Generally, you connect cable TV right to this board (and can also hook up an FM antenna for radio), the board tunes in the channel you want to watch, decodes the baseband audio and video and then encodes it using MPEG2 at very high rates (the host processor has to contribute very little. Under the control of the included software or with many PVR programs, you can also watch an MPEG video (or previously recorded show) by connecting a TV right to this board – again offloading both the host CPU and your video card – sweet. There are some issues (aren’t there always) that we will go through later.

 

[dfeller]

How it all fits together:
First, let’s go through the various ways you can hook up a tuner (we will consider both analog and digital tuner cards in the below examples)…
Keep in mind that this is a bit more complicated that the “Comcast all-in-one” DVR since you have to decide what you want to record…

Analog Cable Only

With this configuration (one or more analog tuner cards in a PC fed directly with cable TV), assuming your cable company carries basic cable as analog, you can record and play back the analog NTSC channels from your cable in standard definition. The TV can be connected with anything your video card can handle but the better the connection and the higher the resolution you set, the better the video and especially the menus will look. If you have more than one tuner card, just use a splitter so each one gets the same signal.
What you can watch/record: analog channels between 2 and 125 (normally just 2-64 or so with cable TV)

Note that before 2009, you could also just hook up an antenna where the cable comes in and get analog NTSC stations, but now that they have ceased broadcasting in analog, to get over the air you need a tuner card capable of ATSC reception. More on that in a minute.

But, you say, I also want to be able to watch and reord premium channels (digital channels from 100 to 999 (or more) – HBO, military channel, etc.

Digital Cable – recording premium channels

So what’s different, not much really, except you are coming into the tuner card on the composite input (or into the tuner on channel 3) from a set top box and then the computer/tuner card controls the set top box using an IR flasher stuck to the front of it. Now when you change channels, instead of the tuner on the tuner card changing channels, the little stuck on IR flasher commands the set top box to change channels. For clarity, though, this is still all SD – even if your set top box is HD, the computer will only capture in 480i (SD) because the tuner/input cards are only capable of capturing SD video. The upside is that you can record everything – cable channels, premium channels, everything. And once recorded, you can then watch them on the local TV, or on any other TV in the home through BOCS or a media center extender (if you are using windows media center) or through a connected media player (like the HDX1000 or popcorn hour).

What can you record? – everything available on cable – through a cable box – in SD.

One other note – no problem mixing inputs – meaning if you have two tuner cards, one can be directly hooked to cable and the other through a cable box – most PVR software lets you tell it what each tuner is capable of receiving.

ClearQAM and ATSC over the air:
Moving on to tuners with digital capabilities. Note that almost all of them will also tune analog (see multiple vs. dual tuners above).

With the switch from analog to digital broadcast (from NTSC to ATSC) there are actually many more stations available for free. Turns out that now, a single transmitter can carry 5-10 channels instead of just one. So broadcasters are definitely broadcasting more, and a lot of it in HD. As a quick note, the best HD that can be had (antenna, cable, satellite) is most definitely over the air. Broadcasters are sending the best quality signal but cable and satellite both highly compress the signal as both have limited bandwidth. The only issue is that most tuner cards have a “digital” input (QAM or ATSC) and an analog input. That means you have to dedicate a tuner to either ATSC or QAM – cable. In the picture above the top tuner is dedicated to ATSC digital and the analog portion of it can also tune NTSC analog over cable. If the bottom tuner were also dual analog/digital, it could pull in the QAM signals off cable. Again, the cable companies are required to carry local stations in clearQAM – unencrypted. So with both ATSC and QAM capable tuners, you can actually record in HD quality.

What can you record? All the analog channels as in the first example PLUS either HD QAM stations off cable OR HD ATSC signals from an antenna. Very cool.

A couple notes – depending on the card, some make you choose either analog or digital (QAM or ATSC), and a few like the Hauppauge 2250 are true dual tuner cards – meaning you connect one cable and can record two clear QAM or two ATSC channels at the same time (or analog).


The Ultimate – recording premium channels in HD:
Even though these digital cards can record in HD, they cannot generally accept an external HD signal – only tuned HD. So, if you want to record HBO in HD (since it is definitely not Clear-QAM and you need a cable box to tune it in) you have three choices:

1) An external HD-PVR capture device like the Hauppauge HD-PVR

In this case, all the tuning is done by the set top box, the capture is done by a stand alone box that takes component video/audio in, encodes it to H.264 and sends that video over a USB cable to the computer to be saved or watched live. In this particular picture, the top tuner can record all the same things the bottom tuner can, but the bottom one is capturing in HD. Obviously, the external capture device is doing hardware encode so, again, It is relatively easy on the processor.

I’ll go into detail later, but there are plenty of little gotchas still to get through – for instance clear QAM recording only works seamlessly if your electronic program guide supports those channels. Windows 7 or a third party EPG is recommended if you are hooking up to QAM.

2) A tuner with cable card capabilities. Currently there is only one on the market that I’ve seen and they offer both an external and internal option – The ATI TV Wonder.

The basic idea is that this is a digital tuner “card” except with the addition of the cable card, it can tune in your premium channels as well.

3) While I’ve not done it myself, you can connect your cable box to your computer via firewire and get video that way. Channel changing is only supported with some set top boxes, however, and a special driver is required to interface all this into windows media center.

 

[dfeller]

Chapter 3: Tuners, Tuners, Everywhere

Yes, there are a LOT of tuner cards out there, there are a bunch of different features, and you should consider this as an overview and do your own research as well. As soon as this is published, new cards will be on the market.

So – what are your choices? You need to first choose your PVR software and make sure the tuner you choose is compatible with it.

PVR software overview: (See PVR software chapter for in depth selection guides)
• Windows Media Center – Nice interface, already works with most remotes (you might need to add an IR receiver), set up to stream to media center extenders including xbox, plays DVDs, most videos, music, pictures, and handles remote storage well. Drawbacks? It is windows and that makes it subject to the same issues as your work PC – BUT; treat it as a standalone media center and you will have far fewer issues.
• Free Windows based programs: GB-PVR is probably the most popular and well supported by the community, but Freevo, WinTV (Hauppauge), and other bundled tuner packages like MyHD and FusionHD also work. The open source programs (like GB-PVR) work very well but usually take just a little tweaking and editing to get running. With GB-PVR, the instructions are clear and well documented.
• Free Linux based programs – mythTV is the most popular and well supported and has now been bundled with a linux debian distribution for simpler install using knoppmyth. If you have a general understanding of linux systems this is a good option, but unless you are using a Hauppauge 350 card on a vary standard system you will likely have to dive into editing linux files and even with a good support system can get over your head. Check the knoppmyth wiki for supported tuners and hardware.
• Purchased PVR software – the most popular are sageTV and beyondTV – both are broad in their tuner support and are relatively easy to set up. Expect to pay $80-$100 for a home license (most software charges you for the main server but not for extenders elsewhere in the home – and obviously a BOCS system allows you to get the entire experience on every TV in the home)

Table of common cards and their features:

Compatability, 7=Windows7, X=XP Media Cetner, G=GBPVR, S=SageTV, M=mythTV and/or Knoppmyth, B=BeyondTV - note, just because one is not listed does not mean incompatible – it only means I haven’t tested it myself yet.

The Green Dots, , are “noteworthy items” low cost, tuners, capabilities to consider

** The 1212 (HD-PVR) can be “made compatible” with most systems by using a third party driver from DVBlink which essentially fools the PVR software into thinking it is a tuner when in reality it is just an MPEG encoder taking its input from a cable box. IR, then, must be handled by the PC directly.

A note on QAM support – Generally, QAM is not supported under XPMC or Vista but with W7, most of the listed cards that show QAM support work with the program guide under MC. Note that an upgrade patch – totally unsupported by Microsoft – has made its way to the internet to upgrade Vista to support QAM. See this link for more information.

Other USB tuners – many work with Media Center and/or third party applications, but almost all use software encoding. Two things to consider there – software encoding requires a lot of CPU power and many of the tuners only support the encode within the software they came with. The Hauppauge 950Q (or the equivalent white labeled HP USB tuner stick)

Obviously, many other tuners are available, and I’ll add to this list from time to time – feel free to send me the ones you use as well.

Video Cards:
So how exactly do I get the PC to display on my TV?
Ideally your video card/motherboard already has DVI, component, S-video, composite, or HDMI. Note that there are two forms of DVI. If you have DVI-I it can easily be “split” into component video with a low cost adapter. Your second option is to get a converter that will take VGA and output composite or component video – they can normally be had for about $20-$30 and frequently are marked PC-to-TV adapters. A new video card is also a good option if you have a free AGP, PCI-E, or PCI slot. A Video card that has DVI/component AND composite out would be ideal so you can provide local HD and remote SD to the rest of the home from the same card. Also note that when you plug in a new video card, the onboard one is frequently disabled.

 

[dfeller]

Chapter 4: Prepping your old PC

Before we get into all the specific software options for running your DVR-PC, we need to get your computer ready. These steps will give you the best chance of a streamlined installation and keep skips when playing down to a minimum by removing everything that you do not need for entertainment.
A few general rules and things to consider for a media center (or PVR) PC
• You will be dedicating it for entertainment applications so strip it down
o Remove any extra cards, interfaces, and connections you don’t need for media center
o You can always add things back in later but get a good baseline of playback before you start taxing the computer
• Remove all software that is not critical to entertainment applications - both to save hard drive space and cycles
o It is ok to leave office application on there but be sure to disable all startup and tasktray services so they do not tax the processor when not running
• Use msconfig (from the run menu) and disable everything that starts that is not critical - get rid of desktop and launch icons
o This is a biggie – stop as much as possible. Look through even the Microsoft services. Any service you do not recognize, Google them and a variety of sites will describe exactly what they are and whether they are critical. This application does not uninstall anything, it only prevents it from loading on startup so if anything gets flaky, you can always turn services back on one at a time until it clears up. Be sure to look in all the tabs – services, startup in particular.

You simply uncheck any service or program to prevent it from starting next time you boot. Once you clear everything you can, just press OK – It will ask you to restart – do that now. When your system restarts it will notify you that changes have been made – tell it ok and not to tell you about it again.

• Consider a low overhead antivirus like AVG
o This is like the PC vs. MAC discussion, everyone has their favorite. I would, however, proffer that an AV program that uses as little system resources and adds the least overhead as possible is a better choice for a media center/DVR. I’ll even go out on a limb and say that I firewall mine up, limit access, don’t use it for real browsing or typical applications and leave off an AV program altogether.
• Make sure you have a good codec pack in place - Google XP essential codec for some good packages
o Codecs – huh? This is the HUGE benefit of using a PC as a media player as opposed to one of those cool little stand alone boxes – you can update your codecs yourself. The more you have the more file types you can play. I’m not going into the different ones and options here in detail other than to say you need the one that best matches your tuner card, you need xvid/divx, and if you are going to be playing DVDs you need a specific MPEG2 one as well.
• Is your hardware adequate? 1GHz per encode or decode stream (less if you use a hardware encode option), an 1GB total memory is recommended. Check the specs for your tuner card – they are usually a good guage of power.
• Is it quiet enough? Fans and hard drives tend to be the loudest things - consider a quieter fan and/or hard drive. Again, a quick internet search will quickly reveal a whole subculture of – well – lifeless folks who are obsessed with eeking every last tenth of a dB of noise out of a media center PC. The largest things that effect the output are fans, the structure of the case, the hard drive itself and how it is mounted, and the CPU fan/cooler. A brief note that overclocking typically raises the temperature of a CPU, requires a bigger fan/cooler, reduces the effective life of the CPU, and by extension makes things louder in general. (I mean lifeless with a huge amount of respect by the way)
• Does it have bright blinky lights on the front that will be distracting when watching a movie?

So - there is an order to things:
1. Double Check BIOS settings to make sure nothing is set up for the PC’s “old life” - CD first boot, HDD Second, on board video activated, not over-clocked etc.
2. Is your OS OK? If so, strip it down, if not install the new one now. Consider at least 100-150GB for the primary partition where the media center and or PVR resides for TV recording - some of them prefer to store recordings only on the same drive where the PVR program is running
3. If your on-board video card does not support the outputs you need, consider installing a second one now - make sure that is all up and running before proceeding. You will need at least a composite output – preferably both a component/DVI/HDMI AND a composite. Note that many on board video GPUs have a composite output – some already support simultaneous output, some require you to choose one. Adding another video card is usually a low cost addition and will give you huge flexibility. Enabling the “TV OUT” is sometimes tricky – with Nvidia cards a “detect display” button is usually provided that almost never actually
4. Install tuner cards and verify they work using the software that came with them
5. Install your PVR program of choice and get it functional - EPG is usually the hardest part, but make sure network connections, radio, proper recording all function
6. Verify video quality of live tv and recordings - different codecs have different performance with various tuner/video card combinations
7. Get Sound working - depending on your setup, spdif/optical is usually the best choice, but if you intend to use the computer for gaming as well, you might need analog 6 channel outputs to your amp (depending on your audio card and drivers and whether they translate everything to spdif or not)
8. Setup the second drive partition as a shared resource and consider installing other Network Attached Storage if your library grows.
9. Install whole-home distribution system like BOCS so every TV in the home can access your new creation

OK – ready to actually put a PC together – if you are starting from scratch, watch this video on

that covers all the basics.

 

[dfeller]

I don't have time to post more right now, but the next few chapters are :

• DVR software features and functions (direct comparisons of the more popular options)
• Roadblocks and specific workarounds
• Details on recording in HD
• Appendix - links and useful software

David

 

[dfeller]

I'll keep posting sections, but the whole thing can be downloaded from the icon link in my signature.