Home Theater Forum and Systems banner

1 - 3 of 3 Posts

·
Registered
Joined
·
53 Posts
Discussion Starter #1
I just want to ensure I have all my ducks in a row so I thought I would post so that you extremely knowledgeable people could correct me if I am missing anything! My goal is to EQ my subwoofer with a BFD.

My equipment:
Onkyo 806 Receiver
Behringer EP2500
Maelstrom-X (sealed 6 cu. ft.)
Computer with Chaintech AV710 Soundcard
Radioshack SPL Meter (older 33-2050 model)
Plenty of RCA cable

What I plan to purchase:
DSP1124P (or) FBQ2496 (I haven't decided which yet)
Handful of RCA Jack To RCA Jack Adapters to extend RCA's if needed
(2) 3.5mm Stereo Plug To Dual RCA Jack Adapters
3’ XLR cable to go from Behringer 2500 amp to EQ
USB –to- MIDI cable from computer to BFD (I know this is optional)

I've read through the FAQ's and the REW help files but am I missing anything? Thank you for any insight/assistance!
 

·
Registered
Joined
·
53 Posts
Discussion Starter #3
You'll also need a cable to go from the Onkyo receiver to the BFD. A cable with an RCA on one end and 1/4" mono on the other will do the trick. :T

Regards,
Wayne
Doh! I knew I was forgetting something. I already have one of these (currently going from my Onkyo's sub out to the 1st channel of my Behringer EP2500) I'm assuming that would work. Thanks for the response Wayne!
 
1 - 3 of 3 Posts
Top