Home Theater Forum and Systems banner

1 - 3 of 3 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
I have had my cleanbox for about 9 months or so and recently I have been having an issue with it picking up an AM radio station (1510 to be exact). When I first got it I did the capacitor mod and haven't had any problems up to this point. I have checked my solder joints and they are good non-cold joints so I don't think that's the issue, who knows maybe re-soldering couldn't hurt...

The setup is Rcvr <-> Cleanbox <-> BFD <-> Crown K2 <-> Subs

I have tried removing everything except the Cleanbox, amp and subs and still have the same issue. One thing to note is that it does get louder when I take the knob off of the channel 1 input adjustment and touch the metal on the pot.

Anyone seen this or have any ideas?
 

·
Registered
Joined
·
287 Posts
Check that the shields are intact on all the cables, and that the cables are seated properly...
 

·
Banned
Joined
·
15 Posts
I'm guessing you touching the pot is giving it a better antenna. If all the connectors and shielding is solid, try a different circuit for power.
 
1 - 3 of 3 Posts
Top