Hi,
I an a novice in Home Theaters but managed to built my HT system based on a PC connected to a DLP projector which will holds my complete Media Collection. Got a problem with the Audio connection: I purchased a 7:1 Soundcard which comes with 4 Standard Stereo input connectors
1. FRONT
2. SIDES
3. CENTER & SUBWOOFER
4. REAR
My speakers are all bare wire. Any ideas how to connect bare wire to a standard 1/8 stereo cable? I also would need to make a connection from the right speaker to the left (same for sides&rear) ? I keep searching for plugs and bridge connectors but am hopeless at this point.
What's the right way to do this?
http://c1.neweggimages.com/NeweggImage/productimage/29-132-006-07.jpg
ASUS Xonar D2 Ultra Fidelity Sound Card With Dolby/DTS Technologies
I an a novice in Home Theaters but managed to built my HT system based on a PC connected to a DLP projector which will holds my complete Media Collection. Got a problem with the Audio connection: I purchased a 7:1 Soundcard which comes with 4 Standard Stereo input connectors
1. FRONT
2. SIDES
3. CENTER & SUBWOOFER
4. REAR
My speakers are all bare wire. Any ideas how to connect bare wire to a standard 1/8 stereo cable? I also would need to make a connection from the right speaker to the left (same for sides&rear) ? I keep searching for plugs and bridge connectors but am hopeless at this point.
What's the right way to do this?
http://c1.neweggimages.com/NeweggImage/productimage/29-132-006-07.jpg
ASUS Xonar D2 Ultra Fidelity Sound Card With Dolby/DTS Technologies