Home Theater Forum and Systems banner

1 - 2 of 2 Posts

·
Registered
Joined
·
108 Posts
Discussion Starter #1
I searched but couldn't find a pic that shows how to connect the M-Audio's MobilepreUSB soundcard.. can anyone guide me to one...?



There are a few outputs on this card ..does it matter where I connect it to my AVR aux inputs?
 

·
Registered
Joined
·
7,514 Posts
You want to connect the AVR to the same output you used to do the soundcard calibration...

For soundcard calibration, you would need a cable that was terminated in 1/4" TS phone plugs. You would connect from line-out to line-in and create a soundcard file and then remove that short.

Then use the 1/4" output with a TS plug to connect to the AVR.

If you are using an SPL meter, use the 1/4" input with a TS plug. If you're using a mic, then you would of course use the XLR with phantom.

All of this would be using only one channel of course. I believe they call them 1 and 2 instead of left and right, so use channel 2.

brucek
 
1 - 2 of 2 Posts
Top