Home Theater Forum and Systems banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I'm trying to connect BFD (input) right and left channels to two separate preamps and outputs to right and left channels on a sub. It would seem that the sub would play whatever signal comes down from either system, and use a different EQ setup for each. Can anybody see a reason this would not be a good idea? Is there a potential problem I'm overlooking?
 

·
Registered
Joined
·
7,514 Posts
Are you feeding one system into the BFD left channel only and the other system into the BFD right channel only?

brucek
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
That's correct. I'm feeding one system's mono subwoofer output to the BFD left channel, and the other system's (mono subwoofer output) to the BFD right channel.
 

·
Registered
Joined
·
7,514 Posts
I see no problem then, as long as the sub you are feeding accepts a left only or right only signal to achieve the full power output....

brucek
 
1 - 4 of 4 Posts
Top