Cross-Spectrum Microphone Calibration Service - USA
We are happy to announce and recommend Cross-Spectrum Labs for microphone calibration in the U.S. ... particularly the Behringer ECM8000 and Galaxy CM-140. Of course, they will also calibrate other microphones as well.
Cross·Spectrum Labs
P.O. Box 90842
Springfield, MA 01139
I have personally spoken with Herb Singleton, founder of Cross-Spectrum, and he as agreed to calibrate these units 10Hz to 20KHz provided you specify you would like calibration to 10Hz. The charge is $55.00 and includes the cost of return shipping via USPS for customers in the continental United States..
Cross-Spectrum will use the pressure method to calibrate the low frequency response and the quasi-anechoic free-field on-axis method to calibrate the upper frequency response. The pressure method is one of the most accurate methods of measuring the frequency response of a microphone, however baffle diffraction must be accounted for when using this method. Generally mic manufacturers will provide the variance to offset the baffle diffraction. Unfortunately, Behringer nor Galaxy offers these variance corrections. Therefore, the free-field method of measuring the upper frequencies will be more accurate for these units. These combined calibration methods will give us the best calibration file for the ECM8000 and CM-140 mics. This is one of the first labs we have found that will calibrate the CM-140 SPL Meter microphone.
Cross-Spectrum also offers calibrated Behringer ECM-8000 microphones for sale. The cost is $100 + shipping. Please see their Behringer page for more information.
Herb will be joining us here at the Shack and has agreed to answer any questions anyone may have. Please check out their site before asking questions... you may very well find your answer. If you do not find the answer you are looking for, you may post a question here in this thread and Herb will do his best to get you an answer. Remember he is busy in the lab and does not monitor this forum 24/7, so please be patient... or you are more than happy to contact him by telephone (see their Contact Us page).
Remember, if you are wanting your mic calibrated to 10Hz, you must include a note requesting same, otherwise the calibration may only be to 20Hz.
We appreciate Herb's willingness to work with us in providing this service to our members here at the Shack.
