Danni123
Join the discussion
Recommended Reading
-
How to connect RCA 5.1 surround sound to receiver?
DIY Repair and MaintenanceMy receiver has settings specifically for Dolby 5.1 surround send. It’s old (but still strong!) and only has RCA inputs (no HDMI or Optical). I’ve included an image of the back. I’m having trouble understanding how to feed it the surround sound information with the plugins on the back. The goal...- 5
- 569
-
mynameislewey · updated
-
Rotel RSX-1065 Problem
DIY Repair and MaintenanceI have a Rotel RSX 1065 and I moved it into another room recently. I've been unable to get audio to come out of the front speakers but the subwoofer is working fine. I am using optical 1 as an input and pcm 2ch as output. I've also been having an intermittent problem where the audio and...- 9
- 6K
-
moh · updated
-
Yamaha RX-V667 PS2 fault
DIY Repair and MaintenanceHi all, I am having trouble repairing my Yamaha RX-V667. It initially shut down due to an over current fault which turned out to be a short on a channel (blown transistors etc) and would not go into self diagnostic mode. I repaired the channel and now it turns on for 1 second and turns off. I...- 9
- 4K
-
Need Part # Of Amp on/off switch
DIY Repair and MaintenanceHi Guys, I am trying to determine the part Number for the On/Off Switch for my Buttkicker BKA-130 amp. I have the schematic and found the on/off switch in there but the number there does not seem to be associated with any switches I have looked for.. So here is the schematic for the BKA-130...- 21
- 1K
-
The_Nephilim · updated
-
Marantz 7010 flashing red every 1/2 second
DIY Repair and MaintenanceMy Marantz has recently started to flash the red flash of death, apparently, this flashing relates to the protection circuit, the unit had sat for a few months but I suspect that I've probably shorted a speaker wire when dismantling the setup a few months ago. Any suggestions on where to...- 0
- 435
Join now to ask and comment!