Home Theater Forum and Systems banner

Dayton 15" DVC in modified Adire box

2077 Views 3 Replies 2 Participants Last post by  Blaser
Hey yall

This is my first DIY speaker. I based the design on the Adire Tempest Adire Alignment plans (214l tuned to 15.4 Hz). I moved the driver to the front of the cabinet, 3" from the top because of space limitations (natural problem with this sub). I also moved the cuts in the braces to accommodate the change and keep the volume exactly the same. This has all been on paper so far. The MDF is all cut into rectangles, ready to be further mutilated.

So here's my question: I got to thinking that the driver being so high (2 ft or so) was a bad idea because the box might tend to wobble and lose efficiency due to some sort of lever effect. I put the driver up there so animals (and eventually maybe kids :dontknow: ) couldn't get to it. Is it better to have it 3" from the top or 3" from the bottom? It will be spiked on carpet.

Thanks in advance!
1 - 2 of 4 Posts
1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.