Home Theater Forum and Systems banner
1 - 2 of 2 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Hi everyone i have been wanting to do a subwoofer diy build so i have found a Dayton Audio RSS315HO-4 and they have enclosures for them but they are sealed i i'm not a fan of sealed subwoofers but i have found that doing this subwoofer would be hard to do it as ported because of how long the tube has to be if i do aeroport so parts express wants me to do a passive radiator but the thing is should i do 1 pr or 2 or upgrade the pr to a 15" since i'm either going to use the 1.5 or 2.0 cu ft box they have for this subwoofer and if i do 2 pr's what place on the enclosure should be be put in on the sides or 1 one a side and 1 on top? Because one side of my current subwoofer which is not far from the box size is beside my wall i don't think a pr beside a wall would be safe for that. and for the amplifier i will probably use my current Crown XLi 2500 and use a graphic EQ i think it might work. subwoofer: https://www.parts-express.com/dayton-audio-rss315ho-4-12-reference-ho-subwoofer-4-ohm--295-466
passive radiator: https://www.parts-express.com/dayton-audio-rss315-pr-12-aluminum-cone-passive-radiator--295-502
Amplifier: https://www.sweetwater.com/store/de...nLV47v8n0UpoewQ4dVFs04DXm7qFKy9xoCR0UQAvD_BwE
EQ: https://www.sweetwater.com/store/detail/ART355
 

·
Premium Member
Joined
·
1,923 Posts
I moved your thread to the DIY subwoofer area hopefully for more attention
 
1 - 2 of 2 Posts
Top