Home Theater Forum and Systems banner

1 - 1 of 1 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
I'm planning a build with the Dayton Ultimax 12", and was hoping to get confirmation that my plans look ok.

I've attached a WinISD model, using a 170 L (6 cu ft) ported box, tuned to 20 Hz, stuffed (Qa = 5) with a 20 Hz high-pass filter (I'll be using a DSP amp).

There is a single port in the model, 5.51 x 3.23 x 16.40 inches. I was thinking of having the box more tall and narrow than a cube. If I did that, would it be ok to have the port opening on the bottom?
 

Attachments

1 - 1 of 1 Posts
Top