Home Theater Forum and Systems banner

1 - 2 of 2 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter #1
when service manual tells him to turn deflection yoke for vertical raster adjustment, does he loosen belt clamps and literally turn the coil pack? is their an electronic adjustment dial?:reading:
 

·
Plain ole user
Joined
·
11,121 Posts
when service manual tells him to turn deflection yoke for vertical raster adjustment, does he loosen belt clamps and literally turn the coil pack? is their an electronic adjustment dial?:reading:
Adjusting the rotation of the image as a whole can be done mechanically by turning the yoke. Some sets also have electronic controls for skew & tilt individually. I would only twist the yoke after centering those and if both are off in the same direction. Also be careful to not move the yoke along the neck of the CRT as this will affect geometry.
Posted via Mobile Device
 
1 - 2 of 2 Posts
Top