Home Theater Forum and Systems banner
1 - 2 of 2 Posts

·
Registered
Joined
·
678 Posts
The 1910 should be doing video passthrough when in standby mode, if you set the options. Look on pg 28 of the manual: you need to first enable HDMI Control. You can then, in the Standby Source, select whether it is the last HDMI source selected or one in particular.

Bill
 

·
Registered
Joined
·
678 Posts
Thanks Bill, I did what you said and it is working now the receiver is in standby and I am still getting video but the audio is a little sketchy.
I think I've read in the avsforum thread that sometimes the PS3 doesn't recognize that the receiver has entered standby and change its audio format to 2.0 for the set. It appears that some people run a separate digital audio cable to the set, some change the PS3 to use PCM instead of bitstream, and some just toggle the audio source to ensure a new HDMI handshake takes place. So you may need to experiment.

Good luck,
Bill
 
1 - 2 of 2 Posts
Top