Home Theater Forum and Systems banner

different measurement results with, length 1M, 512K etc..?

1304 Views 5 Replies 3 Participants Last post by  crossrh
Something I don't quite understand is why I'm getting such significantly different measurment result with the different sweep length, I expected these to be similair. I thought it might have had something to do with the impulse time due to room accoustics, so I shortend this but with little effect.

Can someone explain this to me?

1 - 2 of 6 Posts
Are you running just one sweep, or multiple sweeps? Multiple sweeps made my results show a significant drop in the high-freq. John advised me to do just one sweep, and attributed it to timing errors with USB.

In another thread he mentioned doing "synchronously averaged" sweeps. I think the thread was called "@John" or something like that. I'm afraid to go back and look, only to lose this reply.
Your graphs, at least in the high-freq region, look like mine did when I ran multiple sweeps. Now I only run single, 1M sweeps.
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.