Home Theater Forum and Systems banner

DIY best cheapest frame for Carl's Blackout Cloth, 16:9, 110x200, Projector Screen

3382 Views 1 Reply 2 Participants Last post by  madermat
Hi. I have an Epson 2030 that I would love to bring outside for movie nights. I have been looking at this screen material and am wondering what would be the best way to build a frame that is durable and cheap at the same time. Anyone ever done this and have instructions and pictures? I also want it to look good as well. The material is the Carl's Blackout Cloth, 16:9, 110x200, Projector Screen Material, White, 1.0. That would be a 228" diagonal screen. Any ideas welcome. Thanks.
1 - 2 of 2 Posts
thats a big screen maybe pvc tube and put some grommets in the cloth and use some bungess or clips .if you dont want to fold it up to put it away i built a simple frame from 1x3 for my 128 inch (much smaller) and it is pretty strong
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.