Home Theater Forum and Systems banner

Driver Sensitivities and SPL's

2274 Views 6 Replies 4 Participants Last post by  Danny
Hi Everyone. I just thought I'd ask everyone what sensitivity and SPL their Sub is capable/rated at. I'll start it off. Mine is 99Db/W/M and had a theoretical output of 126.5Db (it really only puts out 120Db because of the box and other losses.

1 - 7 of 7 Posts
You gotta list your sub too! :R

SVS PB12-Plus/2

Sensitivity (2.83 V/1m, avg'ed from 16 Hz to 200 Hz):86.5 dB spl
Sensitivity (2.83 V/1m, avg'ed from 20 Hz to 200 Hz):87.6 dB spl
Sensitivity (2.83 V/1m, avg'ed from 25 Hz to 200 Hz):88.5 dB spl

Not sure on the output level.
Not really sure if I can, it's an as yet unreleased Driver. Don't take it personally - it's just business.

I wish I could answer ya Danny about sensitivity. The highest I've gotten (withing a comfortable threshold) is about 105db and @ 20hz :)

Can you give us any specs on the driver at all? Is the rating for the driver itself or the final system rating after the driver has been installed into a specific enclosure? If this is merely the rating of the driver, that really sounds like pro-sound product. I'd love to see the actual T/S parameters for the driver if/when they are available.
Rating for the driver is 126.5DB so it probably is more pro-sound. I'll (hopefully) be able to put out some T/S parametres soon. It's a 4 ohm Driver.
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.