Joined
·
171 Posts
I must be blind. can sombody please tell me where I can find the cal file for ecm 8000 and how to load it into rew
thanks
Jason
thanks
Jason
ECM8000 cal file
1 - 5 of 5 Posts
Joined
·
22,577 Posts
Joined
·
171 Posts
thanks heaps Sonnie
Joined
·
9,190 Posts
The short answer is “not really.” It would require an expensive mic with verified flat response to reference it to. Your best bet is to just use our generic calibration file with the realization that it won't be 100% accurate.
Regards,
Wayne
Regards,
Wayne
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
MobilePre USB Setup and Troubleshooting Thread
SPL Meters | Mic's | Calibration | Sound CardsNot sure if one of these exists, and after all the issues I've had, figured I'd start one here and hopefully save anyone else from buying a new MobilePre thinking their's was shot! :rolleyes: Equipment and Software This is the MobilePre I'm using... Okay, so first things first, go download...- 22
- 30K
-
REW Sound Card Database
SPL Meters | Mic's | Calibration | Sound CardsIt's been discussed that maintaining a list of sound card/mic pre/mixer/mic options might be valuable, including any pros and cons or notes on use. To kick it off, please post your REW signal chain components (not including cables) and what operating system you are using. Here's my current...- 118
- 67K
-
REW asks for Umik-1 calibration file every time
SPL Meters | Mic's | Calibration | Sound CardsHi forum-- Why does REW make me look up my calibration file every time I start it? Can't it remember this? Am I doing something wrong? Thanks, --Myles- 2
- 719
-
Natural sources of Pink Noise for Mic Testing
SPL Meters | Mic's | Calibration | Sound CardsNeed to check a measurement mic frequency response and of course a speaker will color the graph. I have heard an Air Compressor can be used to generate full audio spectrum Pink Noise. True? Other sources of Pink Noise? Or.. I there a good DIY way of getting an accurate frequency response graph...- 15
- 2K
-
RS meter #33-099
SPL Meters | Mic's | Calibration | Sound CardsHi, The only sound level meter that I see on the Radio Shack site is #33-099. Will this work with REW or would I be better off finding one of the meters shown in the help file (33-2050, 33-4050, 33-2055)? Thanks, Steve- 17
- 8K
Join now to ask and comment!