Home Theater Forum and Systems banner

1 - 5 of 5 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
Trying to pull together a setup to use REW. I am interested in full range testing rather than just sub optimization.

Based upon that, I am looking at the following:

ECM8000 microphone

M-Audio MobilePre
Will this work for the soundcard as well as the preamp and phantom power?

XLR cable

Mic Stand

I understand that I will need an SPL meter to establish a known SPL level. Will the RS meter be good for that?

Am I missing anything else?
 

·
Registered
Joined
·
7,514 Posts
Will this work for the soundcard as well as the preamp and phantom power?
Yep.............

I understand that I will need an SPL meter to establish a known SPL level. Will the RS meter be good for that?
Yep............

Am I missing anything else?
Cabling to your receiver from the soundcard. Cabling to create soundcard cal file............

brucek
 

·
Registered
Joined
·
8 Posts
Discussion Starter #3
Thanks for the yeps!

Cabling to the receiver from the sound card. Doh! OK.

What cabling will I need to create the soundcard cal file?
 

·
Registered
Joined
·
7,514 Posts
What cabling will I need to create the soundcard cal file?
You would need a cable that was terminated in 1/4" TS phone plugs. You would connect from line-out to line-in and create a soundcard file and then remove that short.

brucek
 
1 - 5 of 5 Posts
Top