Home Theater Forum and Systems banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi All

I'm currently trying to figure out the best speaker positioning and acoustic treatment setup for my new studio. I have issues around 80hz & 125hz which is why I'm doing what I'm doing. These two pics are far better than where I was originally but I'm not sure which is the best.

I was just wondering if those in the know could look at these to measurements and tell me which is the best? I'm thinking No. 2 but I'm not at all clued up on REW etc.

Measurement 1
175130


Measurement 2
175131


Thanks
Andy
 

·
Registered
Joined
·
176 Posts
I agree with #2 also.
 

·
Registered
Joined
·
204 Posts
I see two peculiarities with your measurements. First, there is not much output below 50Hz. Are you using subs? Second, the high-frequency rolloff above 10KHz is pretty severe. IOW, neither measurement is very good.
 
1 - 4 of 4 Posts
Top