Home Theater Forum and Systems banner

FBQ 1000 ~ Trouble shooting

872 Views 2 Replies 2 Participants Last post by  soco
Ihave already bought this and i made all the right connections but i believe that i fell into faulty item.
Ι check -call. all the levels (in-out) with the -10db and works fine.
I enter the filters(4) into the left engine -PA- and save them. also the rest filters(8) set them in the OF option.
Now there is no blinking in the front panel , only these 4 steadily red leds ~left engine~in out button green steadily also.
There is no efect from the filters in either of the lighting indications of the in-out button !(no light-blinking-steadily lighting)
Whats wrong , me or the machine?

P.S. I hope i am :help:
1 - 3 of 3 Posts
Does the little indication to the right of the digital numeric figure show “Hz” or kHz?” If so a filter you set for say, 60 Hz will actually be 6000 Hz (aka 6 kHz).

Yes thatsit !! icant believe it , thank you again!

Merry Christmas!!
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.