Home Theater Forum and Systems banner
1 - 4 of 4 Posts

· Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
Hi,
I just got my FBQ2496 this afternoon!
Question is, once I set it up, being that its taking the analog signal from my Reciever/sub out, digitizing it, tweaking it, then re-analoging it, then sending it to my subs amp, then out to my subs; how can I adjust the delay in the rest of my system to accomodate the delay that will be introduced to the LFE after all this processing?

System:
Yamaha RX-Z1 (all speakers crossed over at 90hz)
Paradigm studio reference (40's,cc570,adp590's)
SVS cs25-31plus X2 / 1200watt samson 2ch amp
FBQ2496 EQ for subs (everything below 90hz)

Thanks for any suggestions you might have!
 

· Registered
Joined
·
15 Posts
Discussion Starter · #4 ·
The FBQ DSP adds about a msec processing delay, so add a foot to the distance you set the sub distance in the receiver.

brucek
What if my reciever doesn't have a subwoofer delay/distance setting? The Yamaha RX-Z1 was yamaha's flagship reciever (and carried a heft price tag when I got mine in '02 or '03), but it has no delay setting that I can find for the sub. It also doesn't allow you to change the crossover freq. which is fixed at 90hz. Big time bummer!

Any other ideas???
 

· Registered
Joined
·
15 Posts
Discussion Starter · #7 ·
I believe the YPAO will set the distances/delays correctly if you just run it. I took a quick look at the manual, and didn't see any way to manually set them.
Wow, I'm really dating my equipment now! YPAO didn't come out till the following year.
For what its worth, here is a link to the manual:
http://www.mbmania.com/bin/RX_Z1_owners_manual.pdf

It really doesn't seem that long ago that I bought this reciever! And cost still pains me! LOL!
 

· Registered
Joined
·
15 Posts
Discussion Starter · #9 ·
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top