[tenzip]

I'm not sure how long the delay is, but I believe the standard solution is to just set the distance to the subwoofer to a bit farther than it actually is.

This way, the receiver has to send the signal to the FBQ earlier, so that the sounds all reach the LP at the same time.

I would bet someone will be along shortly to tell us how long the delay is, and how many inches/feet that equates to in the speaker settings

edit: And there's brucek, beating me to the punch.

 

[tenzip]

I believe the YPAO will set the distances/delays correctly if you just run it. I took a quick look at the manual, and didn't see any way to manually set them.

 

[tenzip]

Wow, that's weird. I looked up that model number on the Yammy site, and came up with a different receiver, one that had YPAO.