Home Theater Forum and Systems banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
257 Posts
I'm running 2x18" FI IB3 manifold using the inuke 6000, have been for over a year now, personally I would go with one of these for the money. I compared it to a behringer 4000 I had and they seemed to yield similar output, however the Behringer was bridged, so the inuke offered me 2 channels which I was after, I use the spare channel to run a Quake 10B. I also have a 4x15" FI IB3 in manifold, I run these of a QSC RMX 2450 'bridged'.

I'm sure you've read this but I will stress, positioning of the IB's is key to success. Don't be afraid to run them front and back of your room if this helps with the bass response. This is what I do to great effect, there was no other way of removing the null I was sat in.
 

·
Premium Member
Joined
·
257 Posts
Looking good. Once up and running, are you able to check the bass response from the main listening position using REW?
 
1 - 2 of 2 Posts
Top