Home Theater Forum and Systems banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,492 Posts
I am not an expert at the use of REW (yet!), but you probably are getting "so much information in the 100 to 200 Hz range" because the LP filter is disabled. The sub is trying to reproduce the entire range of sound being fed to it. Engaging the LP filter will cut-out the higher frequencies; a subwoofer is designed to reproduce the lowest frequencies.

I'm sure that someone with more knowledge of REW will add some useful information and address the bumps/nulls (that are probably room modes). Good luck!! :)
 
1 - 1 of 1 Posts
Top