Home Theater Forum and Systems banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hello All,

For the past 4 years i have been using the TX-NR609. I just upgrade to TX-RZ740. All speakers calibration are at 12 but volume is terribly so low.

With the 609, with the intellivolume at +12dB, my volume was always 20 - 25
With the 740 with (my input volume ?), i need to go till 45 to listen some decent, please help me out.

i have attached some screenshots so you could guide me in a better setup.

many thanks and stay safe.
174222
3f7b1e3f-ff36-406c-8150-ea5912217f29.jpg
10e90d44-500d-4200-ad19-d6b7439e9b81.jpg
218fdd49-e394-49ab-adf5-7e884a4fdee5.jpg
 

Attachments

·
Registered
Joined
·
21 Posts
Hello All,

For the past 4 years i have been using the TX-NR609. I just upgrade to TX-RZ740. All speakers calibration are at 12 but volume is terribly so low.

With the 609, with the intellivolume at +12dB, my volume was always 20 - 25
With the 740 with (my input volume ?), i need to go till 45 to listen some decent, please help me out.

i have attached some screenshots so you could guide me in a better setup.

many thanks and stay safe. View attachment 174222 View attachment 174219 View attachment 174220 View attachment 174221
Change your front speakers crossover from Full Range to say 40 or 50 Hz or even 80 Hz as it's wise to make them uniform . Your asking a lot from an amplifer running full range plus another 5 channels .
 
1 - 2 of 2 Posts
Top