Home Theater Forum and Systems banner

1 - 2 of 2 Posts

·
Registered
Joined
·
177 Posts
Discussion Starter #1
Gave up on trying to get my new laptop to play nicely with REW. Going back to my old Dell and SB USB 24 bit live card.

I can't remember how to hook up the Galaxy CM-140 Meter to the card? Do I use a 3.5mm mono male to male cable from the meter into an RCA Adapor into the Right (red) stereo audio adaptor which is connected into the Line-In connection on the Sound card?

I always get confused when I read the Help file as to whether the Y cables need to be used or if using my two stereo audio adaptors is fine! Been a while since I used the SB External Card!

At least this time the sound card calibration went smooth!

Also, with the Galaxy CM-140, if I recall, I leave the C-Weighted box in the Mic/ Settings tab unchecked correct?

Thanks,

Steve
 

·
Registered
Joined
·
7,514 Posts
I can't remember how to hook up the Galaxy CM-140 Meter to the card?
If the line-in of your soundcard is a stereo left and right jack, then it needs to be broken out into its left and right channels so that you can plug the meter into the right channel.

I leave the C-Weighted box in the Mic/ Settings tab unchecked correct?
Check the box. The calibration file will over-ride the C-Weight box over its extremes.

brucek
 
1 - 2 of 2 Posts
Top