Home Theater Forum and Systems banner
1 - 6 of 11 Posts

· Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
Hi,

I've just picked up a second hand DSP1124P and am now ordering the cables so I can do a sweep with REW and set the filters etc.

I was about to order a USB/MIDI cable then remembered my son had been sent one by the folks who make the Guitar Hero game (something to do with the drum kit??) It has one MIDI plug which I assume is for 'sending' only... do you think this will be suitable?


Thanks
J
 

· Registered
Joined
·
9 Posts
Discussion Starter · #4 ·
I will give it a try as soon as my other cables and connectors arrive.

I've got to admit I was a bit intimidated by the unit when I powered it up :yikes: but have now read the manual and a few posts on here and it doesn't seem quite so complicated.


Thanks for the replies :T
 

· Registered
Joined
·
9 Posts
Discussion Starter · #5 ·
Quick update!

The GH MIDI cable worked a treat :T
A quick REW sweep recommended 3 filters which where painlessly uploaded to the BFD :bigsmile:

Only problem I have is that the 'line in' on my laptop sound-card has bloody terrible response :thumbsdown: so I'm on the lookout for a quality external sound-card before I get too serious.


Thanks
J
 

· Registered
Joined
·
9 Posts
Discussion Starter · #7 ·
Hi John, thanks for the reply.

I have hooked it all up again tonight but failed to get the same response from the card! :dunno:

I've attached my sound card cal plot which also has the result (in purple) of a 10hz-20khz sweep through the loop-back (Let me know if I you need the graph formatted differently)

Not too sure what was wrong before but actually it doesn't look to bad does it??


Thanks
J
 

Attachments

· Registered
Joined
·
9 Posts
Discussion Starter · #9 ·
Mmmm, I cleared the meter cal file and did another sweep of the loop back cable but it gave me the same result...?

I don't think I will get time to look at this tonight as the wife wants to watch a film!
I'm working at home tomorrow so will take some time to have a fiddle :T


Thanks
J
 

· Registered
Joined
·
9 Posts
Discussion Starter · #11 ·
DOH!

I had wrongly assumed that clearing the cal file was enough to remove the meter settings :coocoo:
The purple line is now ruler flat :T


Thanks again for the help folks!
 
1 - 6 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top