Harmony Ultimate Home - RF Question

1116 Views 2 Replies 2 Participants Last post by rab-byte, Dec 28, 2014

chris0228

Discussion Starter · Dec 26, 2014

Not knowing a lot about RF functionality and seeing all the "remote" inputs on all my gear, can I come straight out of the home base and into all remote inputs of the gear or daisy chain them? Does this act like a direct RF connection rather than having to use the mini blasters? If so, can I use straight two conductor 1/8" cables? Thanks.

Save

1 - 3 of 3 Posts

chris0228

Discussion Starter · #2 · Dec 28, 2014

bump...

Save

rab-byte

· #3 · Dec 28, 2014

If your gear has an in and out you should be able to cascade the signal.

Yes mono 1/8th should work fine.

This will typically work but some gear (very little) will want some of the IR signal being carried by the control wire to be stripped.

Save

1 - 3 of 3 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month