I currently have a HTPC connected to my AVR via HDMI and also a two channel analog cable. I need the two channel analog cable because my AVR will only use audio sources for the second zone. I have the HTPC OS (Win 10) setup to output to both the analog audio and the HDMI. However when Microsoft pushes through an update sometimes the audio settings get changed. I would like to know if there is a device which will extract the audio from a HDMI signal?
HDMI audio extractor
Join the discussion
Recommended Reading
-
Default Surround Mode?
Audio ProcessingOk...with a disc player and a preamp processor that does Dolby TrueHD, and DTS-Master HD Audio, plus all of the legacy formats, what is the default audio for the newer movies encoded with Dolby Atmos? I'm guessing Dolby TrueHD? How much audio (if any) are we missing by not having the latest...- 7
- 1K
-
Oleson M.D. · updated
-
Data Supporting a Single Setup Mic Position for Audyssey or Dirac Live
Audio ProcessingNOTE: Not for Dirac Live after all... The initial measurements taken when this report was first posted seemed to support the use of a single mic measurement position for getting good results with Audyssey and with Dirac Live. More recent measurements and experiences have shown that this is not...- 29
- 23K
-
AudiocRaver · updated
-
Audyssey XT32 vs. Dirac Live Listening Comparison
Audio ProcessingAudyssey XT32 vs. Dirac Live Listening Comparison Introduction Last year HTS published a review of a the miniDSP DDRC-22D, a two-channel Dirac Live Digital Room Correction (DRC) product. The review included a comparison to Audyssey XT. A number of readers requested a comparison of Dirac Live...- 93
- 91K
-
AudiocRaver · updated
-
Issues to look for with Dolby Atmos playback thru PC 8 channel sound-card then back thru Dolby atmos Pre/Pro
Audio ProcessingIssues to look for with Dolby Atmos playback thru PC 8 channel sound-card then back thru Dolby Atmos Pre/Pro using Digital Coaxial RCA's. Is the Sound room mixing lost or is frequency steering of the Dolby recording algorithms recaptured in the final Pre/Pro processing?- 1
- 867
-
Gregr · updated
-
Mini-dsp DDRC-22d No start button in Measurements
Audio ProcessingHi everybody, Just received my mini-dsp 22d and installed the Dirac Live Calibration tool in windows. Went through the first few steps successfully until I got to the Measurements page. After selecting chair, the program said that the first measurement was ready. However, there was no start...- 2
- 912
Join now to ask and comment!