Home Theater Forum and Systems banner

1 - 13 of 13 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
Hi; I'm John from Wash State near Tacoma. I arrived after Mt Saint Helens- so I can only answer to the aftermath of that event; I did visit the site in 1997. As for my HT interests; I had a basic home theater set-up some years ago; and after moving in my current home decided to take it notch or two further. As I was upgrading the lower level of my home, I opened the walls and ran inwall THX wire for 8 channels (LF-CF-RF; LS-RS; LR-CR-RR); I also ran wire for 2 transducers and 2 buttkickers for the sofa. Room is 16'X24'; I also have 3 X audio transformers (20 amp ea) for power source. 65" plasma, sony BluRay (just recently purchased); M&K 150 speakers 2 M&K subwoofers; and power amps for it all.
It's not all conected yet. I'm piecing it back together after a clothes washer accident ALMOST washed the audio system away.
Anyway, I'm looking forward to hearing about other systems, problems and solutions.
Thanks
John:innocent:
 

·
Banned
Joined
·
22,577 Posts
Welcome to Home Theater Shack!

Howdy levesquejc and welcome to the Shack!

Looking forward to seeing you around often... :T

Sonnie



 

·
Premium Member
Joined
·
15,054 Posts
Hi John, Welcome aboard!

Enjoy your stay.
 

·
Premium Member
Joined
·
3,777 Posts
HI John. Welcome. Have fun. Dennis
 

·
Registered
Joined
·
9 Posts
Discussion Starter #7
Great to see all the information and HT buffs here on this site. Anyone have recommendations for DIY speaker wire terminations; either banana or spades to my M&K 150THX speakers? That's one of my next issues to tackle.
Thanks
John:wave:
 

·
Elite Shackster , HTS Moderator Emeritus
Joined
·
2,216 Posts
Welcome to the Shack! Ask your question again in one of the forums (Remotes/Cables/Accessories would be what I recommend) and you'll get a lot more feedback.
 

·
Premium Member
Joined
·
5,423 Posts
Hello John, Welcome to the Shack. I always wanted some M&K 150's for a dedicated theater,... you have a chance to listen to yours yet?
 

·
Registered
Joined
·
59 Posts
Great to see all the information and HT buffs here on this site. Anyone have recommendations for DIY speaker wire terminations; either banana or spades to my M&K 150THX speakers? That's one of my next issues to tackle.
Thanks
John:wave:
If you want to look at and get your hands on before you buy and don't mind a trip to Bellevue check out Vetco Electronics. I got a lot of my wall mount interconnects there.
http://www.vetco.net/

Steve (near Woodinville)
http://www.kn7f.com/Theater/Finished/
 
1 - 13 of 13 Posts
Top