Help creating driver in WINISD
1 - 2 of 2 Posts
Joined
·
5,771 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
In-floor subwoofers - 8x8" drivers each, highest WAF factor
Sealed Subwoofer Build ProjectsI built in-floor sealed subwoofers consisting of 8 x 8" drivers each (Dayton Audio DCS 205-4). Those were the only 8" drivers which I found to fit in the subfloor cavity with a box built around them. Each sub has the cone surface area of 2 x 15" subs and 1 x 15" sub displacement. The drivers...- 14
- 5K
-
Will P · updated
-
Upgrading With Two Stereo Integrity HST12's
Sealed Subwoofer Build ProjectsThis is a continuation of my modest build that you can read about over here. I chose these drivers because of their compact size requirements, expected impact and relative cost. I have an odd shaped room and wanted more output to work with than not enough, so I bought two. So here's the...- 75
- 12K
-
NHT 1259 Corner Sub
Sealed Subwoofer Build ProjectsBuild thread for a corner sub using an old NHT 1259 I had laying around. Corner is the only place for the sub in the room and I have the 1259 and a sheet of MDF. More to follow.- 9
- 4K
-
Anthony · updated
-
Jl audio 13W3V3-4 40 liter closed box: The best of one world
Sealed Subwoofer Build ProjectsThis topic is the other half of the Best of both world,s. Because i opened a build of the bandpass,http://www.hometheatershack.com/forums/ported-subwoofer-build-projects/66158-jl-audio-13w3v3-4-4th-order-bandpass-best-one-world.html But i took no picture,s of this closed build. I took one when...- 41
- 14K
-
morca · updated
-
8x ultimax 18"
Sealed Subwoofer Build ProjectsHello guys i'm new here i want to say that i'm sorry because of my bad grammar if there's any ( im not from the us uk or australia ) i'm looking to build a 8x ultimax 18" setup, i dont really know which boxes to get so i'm looking for advice, they are mainly going to be used for home theatre...- 0
- 981
Join now to ask and comment!