Home Theater Forum and Systems banner

1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1 (Edited)
UPDATE: Link to my REW file: http://www.totomedia.com/theatre-measurements.zip

Hi folks,

REW noob here -- I have a UMIK-1 and the other day took the measurements posted below. I used the HDMI method via my macbook and followed the guides as best I could. I'm starting to read up on interpreting these, but I thought I'd post here in case anyone with some experience would chime in.

Some notes about my setup:

Room:
Dedicated, 14ft x 22ft x 7.5ft.

Treatments:
2" of Linacoustic on screen wall (with 3mil poly in between), 4" of OC703 equivalent on upper 4 feet of rear wall).

Speakers:
DIY Soundgroup Fusion 12 Tempest for LCR, Klipsch R-5650-W in-walls (hidden in my columns) for surrounds, and 2 DIY Minimarty subs using the Stereo Integrity 18.

Graphs

Mic was placed at ear level in the MLP which is slightly off center, about 12 ft back from the from LCR.

Front Left
Fusion 12 Tempest, Full Range



Front Right
Fusion 12 Tempest, Full Range



Center
Fusion 12 Tempest, Full Range



Left Surround
Klipsch R-5650-W, Full Range



Right Surround
Klipsch R-5650-W, Full Range



Left Back Surround
Klipsch R-5650-W, Full Range



Right Back Surround
Klipsch R-5650-W, Full Range



Subwoofers
2 x MiniMarty

 
1 - 3 of 3 Posts
Top