Home Theater Forum and Systems banner
1 - 5 of 5 Posts
G

·
Discussion Starter · #1 ·
We have a Hitachi 1200 projector. It's run maybe 60 hrs. Was doing fine until a couple weeks back.

We have the unit hanging from an overhead mount, in free space.

All of a sudden, the temp control is shutting us down because of hot bulb. The bulb isn't really the problem.

Do bulb indicators fail? My feeling is it's a bad indicator that thinks it's too hot.

What should I check?
 

·
Premium Member
Joined
·
1,941 Posts
Welcome to the shack Rb!

Before thinking about defects, clean the filter that may be clogged..then see.
 
G

·
Discussion Starter · #4 ·
Cleaned the filters. We've still got the problem. It thinks it's getting hot and shutting us down.
 

·
Plain ole user
Joined
·
11,121 Posts
If the fans are operating and the airflow is not restricted, you could have a bad thermal sensor. Very common failure point on projectors.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top