[lcaillo]

Be sure to read the first 10 posts in the thread below VERY carefully. If you have read it read it again, as I have just updated some of the information on the Hitachi kits.

http://www.hometheatershack.com/for...based-rptv-convergence-repairs.html#post43725

Get the right kit for your set based on the listings there and it will have the right parts. Use the resistors in the kit rather than what the service manual may say, as this is the correct info for the new chips.

Your post has been moved to a new thread in the proper forum to maintain forum organization.

 

[lcaillo]

These are the resistor values for your chassis. Change any that are different and those that are heat damaged or stressed.

RK42 2.7 AT03199S
RK46 2.2 AT03197S
RK50 3.3 AT03202S
RK54 2.2 AT03197S
RK58 3.9 AT03204S
RK62 3.3 AT03202S

 

[lcaillo]

Do you get menus or OSD? Unplug and try again to reset?