Home Theater Forum and Systems banner

1 - 10 of 10 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Iown a hitachi 51uwx20b tv it has a double picture. The upper left and lower right of tv screen ar more red and the picture is bent. Ican go to manual convergence and it shows the colors off of the lines in those corners.Magic focus does not work,it stops in the middle and the number 5 appears in green at the lower right corner. WHATS WRONG Thanks for the help
 

·
Premium Member
Joined
·
3,777 Posts
Welcome Ron. It sounds like your convergence ic (board) has gone bad. Usually not a diy project unless you are used to that sort of thing. Have fun. Dennis
 

·
Premium Member
Joined
·
8,112 Posts
Hello,
Welcome Ron. Sorry your Display is giving you trouble.
Cheers,
JJ
 

·
Plain ole user
Joined
·
11,121 Posts
Welcome, Ron. Look to the DIY Repair forum and find the Convergence Repair sticky. Read the first ten posts very carefully. Then post a new thread for your problem in the Hitachi forum.

Welcome Ron. It sounds like your convergence ic (board) has gone bad. Usually not a diy project unless you are used to that sort of thing. Have fun. Dennis
Dennis, we have dozens, probably hundreds, of folks who have repeired their own sets with this very common problem. If it is the common STK outputs and resistors, a person with a little soldering ability adn a manual for doing the convergence alignment can easily DIY these. Other problems that involve more troubleshooting and equipment are not good DIY projects, but these are usuall symptom-repair fixes that many can do.
 
1 - 10 of 10 Posts
Top