Home Theater Forum and Systems banner
1 - 1 of 1 Posts

·
Plain ole user
Joined
·
11,121 Posts
Change both ICs. Use the kit listed for your model in the Parts post in the convergence thread. Check the resistors or change them all if you get the right kit. The kits come from Hitachi with the resistors that you may need and the upgraded ICs. Read the convergence repair thread carefully!

PS: Your problem is vertical! When you adjust horizontal lines you are adjusting vertically. What you see is vertical pincushion.
 
1 - 1 of 1 Posts
Top